Badge

Moderator: Gavin McArdle

Post Reply
blue1
Posts: 80
Joined: Mon Dec 01, 2008 11:05 pm
Mem No.: 2421
Location: London

Badge

Postby blue1 » Fri Apr 24, 2009 8:46 pm

Please can some tell me what glue I should use to secure the badge on my invader.
I have had a respray and the badge has been snapped of the body.

I will post some picture of my new colour invader.
Top
gilberninvader
Posts: 219
Joined: Mon May 07, 2007 11:24 pm
Mem No.: 1931
Location: GLAMORGANSHIRE

Re: Badge

Postby gilberninvader » Sat Apr 25, 2009 12:47 pm

all the badges on mine are bolted through the glassfibre, Is it possible when your badge was broken off the 2 lugs were snapped off .

Reggie Paul has new 'bolt on' ones give him a bell.

On mine I have a badge on the bonnet ,one on the back and 2 smaller ones on front sides. They are all still available from regalia.
Gareth
Top
blue1
Posts: 80
Joined: Mon Dec 01, 2008 11:05 pm
Mem No.: 2421
Location: London

Re: Badge

Postby blue1 » Sat Apr 25, 2009 11:03 pm

The badge was on the bonnet like the on this website. I apologise for my ignorance as I have had the car since November 2008.
The dopey guy car spraying my car snapped it off and sanded down the area.
Top
User avatar
GGenie69
Posts: 250
Joined: Wed Jun 06, 2007 12:01 pm
Mem No.: 915
Location: Vic/NSW Australia
Contact:
Contact GGenie69

Re: Badge

Postby GGenie69 » Sun Apr 26, 2009 10:16 am

You could stick it on with "body molding tape" but I would guess that when the guy pulled it off he would of bent it. Proberbly thought it was stuck on and didn't realize it was bolted through the body work.


Richard
Image
Top
Post Reply

Return to “Gilblog Forum”

Who is online

Users browsing this forum: No registered users and 1 guest