Completed the bonnet now ..
Repaired the damage to the bonnet inflicted by a previous owner fitting an old wire mesh sports air filter that was too tall and then slamming the bonnet down, luckily (I suppose) the carb wasn't damaged as well.
Any way all stripped, repaired, backets for an auto bonnet stay fabricated and fitted, and primed and aligned so a reasonable gap all the way round ...






Drivers door next, thats could take a bit longer as it has been spilt all down the seam, as aparently a previous owner reversed it out of the garage with the drivers door open and it caught in the entrance and split the door ..
All to keep people like me busy I suppose....
Grahame